NEW! | Shooting Boards | Shooting Board Accessories | Sharpening | Handsaw | Drilling | Bench | Shaping | Disc Sander
Shop Vacuum | Hardware | Kitchen & Home | Other Products | Owners Manuals | FAQ's
Enhance Your Woodworking Fit and Finish
with Hand Crafted Shooting Boards from
~ Artisan Made Tooling, Fixtures and Jigs
for Hand and Power Tool Woodworking ~
Handcrafted in Northern California USA • We Ship Internationally
Temporary Photos. Representative of fence arrangement & parts. Please see WBS - Multi for size.
The Wide Board Shooter™ - Casework Molding
The Ultimate Casework Molding Shooting Board
Whether you strike your own moldings with hollows and rounds planes,
mill them with machine tools, or buy them ready-made,
moldings present a problem for the single chute shooting board.
Unlike rectangular board stock, moldings are boards
with contoured faces that cannot be used for reference orientation.
It is required that they be mitered in the orientation
they will be displayed for proper and accurate fitment.
Cornice Moldings or other horizontally-oriented trim moldings that are
applied to casework, often require distinct left and right hand 45 degree
miters on them that allow the molding to wrap the case horizontally.
This miter requires a shooting board that specifically addresses
this orientation, and maintains accuracy for that orientation.
Fitment for these moldings is critical. Angular accuracy and exact lengths
are important to getting the perfect gap-free fit and finish.
The Wide Board Shooter™ - Casework Molding is a thoroughbred shooting board
specifically designed for mitering Outside Corners on stock that
will be applied horizontally, such as cornice moldings or rectangular stock.
It offers high accuracy, high productivity and excellent ergonomics,
so all you have to do is focus on the task at hand.
Our Wide Board shooting boards are made from Baltic Birch,
the most rugged, stable and moisture resistant of all plywoods.
The overall size is 1-1/4 inches thick, and 22-1/8 x 14-3/4 inches, nominally.
Both chutes are 2-3/4 inches wide,
trued to within 0.001 inch straightness and
within 0.001 inch coplanarity to the top of the board.
The Dust Grooves keep small shavings
from accumulating and fouling the plane's accuracy.
Wide enough to accommodate any plane.
Finely smoothed and buffed with wax
for an accurate, friction-free plane chute surface.
The Wide Board Shooter™ - Casework Molding's working area is trapezoidal shaped,
nominally 9-1/4 inches wide by 13 inches long, which is very roomy for molding work.
Fence faces measure 1-23/32nds high for backing moldings to be trued.
The fence mounting points are counterbore-set steel inserts,
centered on the specific angles offered, and epoxied for rigidity and longevity.
The fence is a special design, for use with two specific situations.
Dedicated left and right 45's, for outside corner mitering on the horizontal.
Designed for thick or thin stock and moldings,
the tall faces are sized for a 2-inch blade and can be
easily disassembled from the bases, for short molding work.
Each working surface has been flattened to .001 on certified granite.
No pivot fences here.
This double-ended fence is purpose built for two mounting positions.
Proper stock orientation is 135 degrees to the plane sole,
and requires that only one position can be used at a time.
It mounts solidly in the two positions that perform this task.
It is user calibrated for high accuracy in either position using two
45-45-90 drafting squares, and maintains calibration under shooting forces very well.
To shoot from left or right using the 45 degree fences,
calibrate, then simply place the shooting plane in the appropriate chute,
and orient the work with it's back against the fence to shoot it.
This board has no right or left handed orientation.
Shooting is performed on either side as based on the miter required.
Precision Accuracy, Ergonomic, Productive, Efficient. Simple to use.
Great for use on moldings or rectangular board stock.
We finish with marine grade Teak Oil, an "in the wood" finish.
Lasting durability with proper care, it's a precision tool.
Click Here for detailed Features and Specifications about our shooting boards.
Fully Calibratable Accuracy
Includes The Base, One Right and Left 45 degree two-piece fence,
and two Stainless Steel / Brass Fence Mounting Thumbscrews.
This board is ambedextrious for 45 degree shooting,
It has no specific strong hand orientation.
Shipping Weight: Approximately 14 pounds.
Artisan Made in Northern California, USA
*Full payment at time of order secures your place in the queue.*
*This is Custom, Made To Order Precision Tooling from a One-Man Shop.*
*Fabrication Lead Times Apply. Thank You for Your Understanding!*
*Prices are in US Dollars, and do not include shipping and handling.*
*Shipping will be billed prior to shipment, for accuracy.*
Our Shopping Cart Offers Industry Standard
Secure Socket Layer 3.0 (SSL) 128 Bit https Protection.
Accessorize Your Shooting Board
Fine Woodworking Tools, Fixtures and Jigs that help make woodworking
Faster, Easier and More Accurate. Please visit our Store
to see our full product line of woodworking and sharpening tools!
"We enjoy making tools, and work to do our best,
because we want our
tools to translate fine craftsmanship
transparently through the artisan,
so they can create their best work, their vision."
~ Rob Hanson, Evenfall Studios ~
Thank You for Shopping with Us!