evenfallstudios.com

Home | Store | Search | Blog | Articles | Reference | Library | Reviews | Contact Us

Follow Us on Twitter!   Follow Us on Pinterest!   Follow Us on YouTube!   Subscribe To Our Blog via RSS!

---> Subscribe to our Newsletter <---

Home -> Woodworks Store -> Handsaw Accessories -> Handsaw Mag Guides

NEW! | Shooting Boards | Shooting Board Accessories | Sharpening | Handsaw | Drilling | Bench | Shaping | Disc Sander
Shop Vacuum | Hardware | Kitchen & Home | Other Products | Owners Manuals | FAQ's

~~~~~~~~~~~~~

Hand Crafted Hand Saw Accessories From

Evenfall Studios - Tooling, Fixtures and Jigs for Hand and Power Tool Woodworking

~ Artisan Made Tooling, Fixtures and Jigs
for Hand and Power Tool Woodworking ~

Handcrafted in Northern California USA • We Ship Internationally

~~~~~~~~~~~~~

The Handsaw Mag Guide™

~~~~~~~~~~

The Handsaw Mag Guide - Small
Price $95.00

~~~~~~~~~~

The Handsaw Mag Guide - Large
Price $105.00

~~~~~~~~~~

For When You Positively, Absolutely
Have To Saw On Target.

Accurate sawing is always nice, but when you really need it, you need it.
Sometimes the boards are special. Sometimes they are barely large enough for the project.
It's times like that when every cut counts.

Sawing drawer fronts in a matched flitch?
Figured boards book-matched where waste isn't an option?
Need to saw dados on target? Accurate angles in face or edge?
Thick bench legs that match? Tenons, Finger Joints, Dovetails?
This Magnetic Saw Guide helps maintain sawing accuracy, and develop good sawing posture.

The Handsaw Mag Guide is very similar in setup and function to a Sliding Bevel,
and it can be set up for any angle in much the same way.

The lower arm of the Mag Guide is similar to the wooden body of a sliding bevel.
It references against the edge of the work.

The upper body of the Mag Guide is similar to the blade. It is set for the
angle chosen, and stabilizes the saw perpendicular to the work.

The beauty of this is that the saw guide itself can be used to
directly transfer angles for sawing to the work!

There are two different Handsaw Mag Guides in the photo above.
The Top Guide is our original version. The lower Guide is our latest model.
We eliminated the lower nut, and now terminate the pivot rod inside
the lower arm offering more clearance for locating the guide on your work.

The lower arm is radiused so it will not interfere with sawing at any angle setting.
Abrasive non skid surfaces help prevent sliding when positioned.

The upper body also has non skid abrasives applied to it's under surface
to help prevent sliding when positioned and in use as well.
It can easily be clamped in place if desired.

The disassembled view of the tool above provides a better sense of
how the tool adapts to set angles and help you saw accurately.
Setting it accurately is easy. It is like a sliding bevel for saws.

Three rare earth magnets are positioned in each side, two near the kerf, and one
above in the center. They create the right balance of attraction and glide.

The side surfaces are sanded flat on certified granite to within 0.001 inch flatness
at 400 grit, and waxed for smooth accurate sawing.

A 1/4 x 1/8-inch rabbet provides clearance for the set of saw teeth below the magnets,
Leaving room to start the saw, without damage to the guide.

The close-up above depicts the rotating tab that helps
stabilize and square the guide on the work.
It swivels out of the way for storage, and can be positioned
to aid the guide for Right or Left Hand set up.

Front or Back, Left or Right. Position the Mag Guide where it fits best for the job.

It's Ambidextrous.

As Shown, we can set the guide to work from the left or right,
and all our guides of this design have this capability.

The sizes offered are versatile. The Large is 7-1/4 inches long, the Small is 3 inches long.
The guide profile measures 1-7/16 x 1-1/4 inches, and the base is 3/4 x 1-1/4 inches.

Use it as a general saw guide, with any Western or Japanese saw.
It's great for cross cuts, angle cuts, miters, tenons and other joinery.
The small model works for dovetails as well, set for the ratio you prefer.

Position the saw appropriately next to the line to be sawn, and slide the guide in place.
The abrasive surfaces on the guide help hold the angle and position.
A clamp can be added if required when needed or desired.

Shown in use with the East West Bench Hook.

The Handsaw Mag Guide's Pivot Hardware is Stainless Steel and Brass.
Corrosion free and meant to go the distance.

Made for any kind of precision cut or miter work you have.
Large or Small, Coarse or Fine.

The Handsaw Mag Guide is a great fit when used with the East / West Bench Hook.

Robustly built to last with proper care.

Available in Large or Small Versions.

~~~~~~~~~~

Shipping Weight Approximately 1 pound.

~~~~~~~~~~

*Full payment at time of order secures your place in the queue.*
*This is Custom, Made To Order Precision Tooling from a One-Man Shop.*
*Fabrication Lead Times Apply. Thank You for Your Understanding!*
*Prices are in US Dollars, and do not include shipping and handling.*
*Shipping will be billed prior to shipment, for accuracy.*

~~~~~~~~~~

The Handsaw Mag Guide - Small
Price $95.00

~~~~~~~~~~

The Handsaw Mag Guide - Large
Price $105.00

~~~~~~~~~~

We Accept Visa, Mastercard, Amex, Discover and PayPal

Our Shopping Cart Offers Industry Standard
Secure Socket Layer 3.0 (SSL) 128 Bit https Protection.

~~~~~~~~~~

Fine Woodworking Tools, Fixtures and Jigs that help make woodworking
Faster, Easier and More Accurate. Please visit our Store
to see our full product line of woodworking and sharpening tools!

~~~~~~~~~~

"We enjoy making tools, and work to do our best,
because we want our tools to translate fine craftsmanship
transparently through the artisan, so they can create their best work, their vision."

~ Rob Hanson, Evenfall Studios ~

~~~~~~~~~~

Thank You for Shopping with Us!

Ordering Policies | Shipping Policies | Terms and Conditions | Privacy Policy | Copyright Statement | Sitemap | Contact Us


Evenfall Studios - Tooling, Fixtures and Jigs for Hand and Power Tool Woodworking

Copyright 1993 - evenfallstudios.com. All Rights Reserved.

We Accept Visa, Mastercard, Amex, Discover and PayPal